|   0086-(0)757-83128353
Location: Home > About Us > News

NANOMET ROOF SHEET matters of the production process

Published date: 2023/6/13

industrial metal roofing

After the trial production of NANOMET ROOF SHEET, the container of the pressure plate is put into place for trial production, and the trial production is carried out 3 days before the processing begins, and the parameters of the pressure plate are repeatedly adjusted until the qualified roof is produced. Adjust the position of the roller again to ensure that the roof plate can walk freely on the roller when the plate is pressed. The raw material for the production of plates is aluminum alloy steel coil, each coil is about 2000kg, and the steel coil is loaded by 5t forklift truck.

galvanized corrugated metal roofing

The steel coil should be placed in the designated position in the processing area. In the production of NANOMET ROOF SHEET, the roller bracket is arranged in the publishing direction of the plate press. When the plate is just pressed out, it is carried by the lifting personnel to guide the plate forward along the drum shaft, and then the plate can automatically walk forward along the drum shaft, but the construction personnel need to observe beside the drum shaft to avoid the plate bending under the drum shaft and being discarded.

gambrel metal roof

When the NANOMET ROOF SHEET length is reached, stop the platen and cut. The length of the plate should be slightly longer than the design by 100mm, which is easy to cut and sample at the end of the plate later. These are the things in its production. You know what? Let everyone know more about NANOMET ROOF SHEET helps!


Share to:

Copyright © NANOMET-SALES LIMITED All Rights Reserved.   Sitemap   XML